Hammar H20E HRU | HE-0100 for EPIRBS

From: £82.51

Description

HAMMAR H20E HE-100 Hydrostatic Release Unit For EPIRBS

 

Please Note: Due to MCA regulations, all HRUs are now date marked on dispatch of purchase and therefore, cannot be refunded after purchase

 

SOLAS Approved    Replace HRU & Bolt every 2 years

 

The Hammar HE-0100 Hydrostatic release unit is designed for EPIRBs

  • Replace Hammar H20E Hydrostatic Release Unit and bolt after two years of service.
  • A spring-activated knife cuts the release rod at a water depth of 1.5 to 4 meters, allowing the EPIRB to float free.
  • Expiry date: 24 months after installation
  • Bolt and Nut are not included.
  • Use only manufacturer-approved replacement bolts.

Please select an additional option from the drop-down menu.

EPIRB Manufacturer Bolt Required
Standard Type
(HE-0021)
Plastic bolt (98mm x M8) Including 2 washers (5.5mm hole)
TRON FB3
(HE-0022)
Plastic bolt, TRON FB3 (50mm x M8) Including 2 washers (5.5mm hole)
TRON FB-4 and FBH-4
(HE-0023)
Plastic bolt (86.5mm x M8) Including 2 washers (5.5mm hole)
KANNAD
(HE-0024)
Plastic bolt (56mm x M8) Including 2 washers (8mm hole)
ACR RLB32
(HE-0028)
Plastic bolt (120mm) Including split pin, washer, and date label
McMurdo
(HE-0030)
Plastic bolt (110mm x M8) Including 2 washers (5.5mm hole)
Extra Long

( HE-0031)

Plastic bolt (110mm x M8) Including 2 washers (5.5mm hole)

 

Servicing Intervals
The Hammar H20E needs no annual service, maintenance or spare parts, but MUST BE REPLACED AFTER TWO YEARS INCLUDING THE BOLT. WHEN REPLACING BOLTS, ONLY USE MANUFACTURER-APPROVED BOLTS

 

Approvals
The Hammar H20 hydrostatic release units are approved worldwide and fulfil the requirements of the SOLAS 74/96 Convention, Reg. III/4 LSA Code, MO Res. MSC. 48/(66), IMO Res. MSC. 81(70), approved by EU Directive 96/98 EC on Marine Equipment has a NATO stock number.

Release depth 1,5 – 4,0 metres according to IMO/SOLAS regulations. The required certificates can be downloaded under Approvals.

 

Please Note: Due to MCA regulations, all HRUs are now date marked on dispatch of purchase and therefore, cannot be refunded after purchase


 

Additional information

H20E Options

H20E HRU

Bolt & Nut Options

Standard (95mm) Bolt, TRON FB3 (50mm) Bolt, TRON FB-4 (86.5mm) Bolt, TRON FBH-4 (86.5mm) Bolt, KANNAD (56mm) Bolt, ACR RLB2 (120mm) Bolt, McMURDO (110mm) Bolt, Extra Long Plastic Bolt, No Bolt or Nut

Delivery Information

You may also like…